Renault Koleos 2012

[skaiser78]

Hello.

I need help with a Koleos 2012 with TomTom Carminat incl. Joystick w/o Bose.
I bought a Hiworld LNF 1.10 for a Junsun X9 headunit with a wiring harness.
Think the plugs are not pinned right way.
I got a 24pin connector to the old monitor plug that ends at a 16pin plug for the decoder. On the other side there is a 20pin connector ending in a 16pin plug for headunit an also a 8pin for tx/rx. Speaker, 12V all at a quadlock

All help from web says plugin in an setup the junsun.
But I can't get the decoder to work. Only if I make a wired bridge between 12V yellow and ACC red directly at the headunit.
The swc and the joystick don't work.

Has someone a hit or explanation about wiring/colours/pins? I tried out Koleos, Megane and Fluente, everytime I restarted the radio.

Thx for your help.

[HIWOORD SONG]

Take photos of the original head unit's connector pinout and the screen's connector pinout, as well as photos of the labels on the aftermarket wiring harness.

[skaiser78]

There are some pics hope they are good enough

[skaiser78]

And some more

[skaiser78]

Questions:

Where is Can H and L?
Do I need to change pin or make a bridge?
ACC doesn't work and swc/Joystick too

Only with a bridge from yellow to res the heaunit wakes up

[Merrik_C]

skaiser78, mate, before anyone starts swapping pins, which of the three Hiworld harness profiles did you have it on when you bridged yellow to red and it woke up? Also have you put a meter on the original plug to see if the ACC wire actually gets 12V with the key on, becuase if it dosnt then nowt on teh harness side will fix it...