You meean the quadlock at the old radio?
No there isn't CAN signal.
CAN must be at the Display Connector.
Think maybe I need al full used harness or measure and re-pon the connector.
Renault Koleos 2012
-
HIWOORD SONG
- Posts: 77
- Joined: Sat Feb 28, 2026 7:33 am
Re: Renault Koleos 2012
Select the appropriate vehicle model, record a video showing the issue, and contact me.
Re: Renault Koleos 2012
How should I select a vehicle when the decoder isn't working? I can't find a cable at the delivered harness which connects the canbus pin from the original TomTom display plug to the 20pin input of the lnf1.10.
The 16pin connector seems to be for key out and key in.
Pics from Internet show the can1 h at pin7 and can1 l at pin7 at the 20pin connector of the decoder. Is that correct?
So I need can high and can low from the oem 24pin connector (pin 1 and 2) connected to the 20pin at the decoder.
Could you confirm this?
And i found that there is tx/rx for the oem Joystick in the middle that could be connected to pin 13 and 14 at the lnf1.10.
I could change the renew the pins when you could check and confirm my informations.
Thank you
The 16pin connector seems to be for key out and key in.
Pics from Internet show the can1 h at pin7 and can1 l at pin7 at the 20pin connector of the decoder. Is that correct?
So I need can high and can low from the oem 24pin connector (pin 1 and 2) connected to the 20pin at the decoder.
Could you confirm this?
And i found that there is tx/rx for the oem Joystick in the middle that could be connected to pin 13 and 14 at the lnf1.10.
I could change the renew the pins when you could check and confirm my informations.
Thank you