Hiworld Forums

I used CAN Hacker to read the outside air temperature from the CAN bus Renault Megane II Phase 2 (2006+).
In CAN message 0x60D, the 5th data byte contains a value ranging from 0x00 to 0x63 (hex).
_dC3QZm20Eo92H3ZZQmIkCyn0sw-1920.jpg

0x00 = −40°C
0x01 = −39°C
…
0x0A = −30°C
0x0B = −29°C
…
0x10 ...

After disconnecting the factory information display, the ambient temperature is no vision displayed on the Android head unit.

Could you please advise what needs to be done to make the ambient temperature appear on the Android screen without the factory information display installed?

The Android head unit supports displaying the vehicle's ambient temperature from the car's sensor. This option is enabled in the settings.

When Renault Megane II or any other Renault model is selected, the ambient temperature is not displayed. However, when Peugeot 4008 is selected, the head unit ...

I connected the CAN-BUS adapter to the vehicle's CAN bus using additional wires via the OBD-II connector:

CANBox pin 7 (CAN1_L) is connected to OBD-II pin 14 (CAN-L).
CANBox pin 8 (CAN1_H) is connected to OBD-II pin 6 (CAN-H).

The CAN bus connection has been completed correctly, as the Android ...

The factory radio has temperature support — see the photo: Please add temperature support for the Megane 2 to CANBUS Hiworld and send a new update file .iap for LNF1.10 H1N4LNF10A

I have a Renault Megane 2, Phase 2 , 2008. TEYES SPRO+ radio tape recorder installed and canbus Hiworld LNF1.10 H1N4LNF10A, connected to the car's CAN bus. But I run to display the outside temperature on the radio.

The outside temperature sensor is connected to the UCH and transmitted to the CAN ...